Scope Of Delivery; Description Of The Appliance; Place Of Use And Connection To Power Supply - SHX SHX30OF2000 Bedienungsanleitung

Scope of delivery

▪
Radiant heater
▪
Operating manual
Set the desired temperature on the thermostat knob (3).
Use 1 power switch (4) or (5) to set the heating power to 1000 W.
Use both power switch (4) and (5) to set the heating power to 2000 W.
To switch the appliance off, set the thermostat knob (3) to its lowest position.

Place of use and connection to power supply

•
Remove all packaging material and keep it out of reach of children. After
removing the packaging, check for any damage to or signs of faults or defects
in the appliance. If in doubt, do not use the appliance and contact your
supplier to examine and/or replace it.
•
Turn the heater upside down (take care not to scratch the finish or cause
damage to the floor surface).
•
Screw the two wheel supports (each with 2 castors) firmly to the base of the
heater, see illustration.

Description of the appliance

1. Handle
2. Control lamp
3. Thermostat knob
4. Power switch
5. Power switch
6. Wheel supports (2x)
7. Castors (4x)
OPERATION
129