Technical Data; Hammer Drill - EINHELL Bavaria BSM 500E Bedienungsanleitung

Operating Instructions for the Electric
Hammer Drill BSM 500 E
Use only sharp bits and use your machine carefully.
STARTING UP
Momentary operation (Fig. 2)
Switch on: Press ON/OFF switch 7
Switch off: Release ON/OFF switch 7
Continuous operation (Fig. 2)
Switch on: Press ON/OFF switch 7 and lock in
place with the locking button 6
Switch off: Press and release ON/OFF switch 7
Drill/Hammer drill selector switch (Fig. 3)
You can change from drilling to hammer-drilling
using the selector switch 4. To drill, push the selector
switch 4 to the „drill" symbol on the left. To hammer-
2
6
7
The speed is
varied by applying
more or less pres-
sure on switch 7.
You can preselect
the speed by tur-
ning the knurled
screw in switch 7.
drill, push switch 4 to the „hammer" symbol on the
right. The hammer drill function is for drilling in maso-
nry, concrete and stone.

TECHNICAL DATA:

Voltage: 230 V 50 Hz
Power rating:
Chucking range: 1.5 mm dia. - 10 mm
Speed: max. 2800 rpm
Sound pressure level LPA: 93 db (A)
Power level LWA: 103 db (A)
Vibration - a w
Weight
Totally insulated
3

Hammer drill

Drill
GB
500 W
10 m/s 2
2 kg
7