Safety Label Locations; Product Identification Plate; Control Locations - Honda WMP20X1E Handbuch

SAFETY LABEL LOCATIONS

The labels shown here contain important safety information. Please
read them carefully. These labels are considered a permanent part of
your pump. So if a label comes off or becomes hard to read, contact
your authorized Honda pump dealer for a replacement.
Letter
A
Read and understand the
owner's manual and the
operation of all controls
before using the machine.

PRODUCT IDENTIFICATION PLATE

Letter
B
1. Conformity mark, according to the EEC/89/392 modified
Directive
2. Year of manufacture
3. Product weight
4. Serial number
5. Model
6. Manufacturer's name and address and authorized
representative
Name and address of manufacturer and authorized representative
are written in the "EC Declaration of Conformity" CONTENT
OUTLINE in this Owner's Manual
105
C
7. Guaranteed sound power level according to Directive
2000/14/EC
There are two serial numbers, one for the engine and one for the
frame. Record the engine and frame serial numbers and date of
purchase in the space below. You will need these serial numbers
when ordering parts and when making technical or warranty inquiries.
Engine serial number:_____________________________________
Frame serial number: _____________________________________
Date of purchase: ________________________________________
Meaning
The muffler is hot. Keep hands
away. Keep people away from
the machine when it is
operating.
Meaning
.
7

CONTROL LOCATIONS

[2] (p. 7)
[1] (p. 7)
[8] (p. 7)
[7] (p. 7)
[10]
[9] (p. 5)
[16] (p. 5)
[15] (p. 13)
1 Choke lever
2 Throttle lever
3 Priming filler cap
4 Fuel filler cap
5 Engine serial number
6 Ignition switch
7 Starter grip
8 Fuel valve
ENGLISH
[3] (p. 5)
[4] (p. 12)
B [5]
[6] (p. 7)
A [LABELS)
[11] (p. 10)
C [LABEL]
[13] (p. 9)
[14] (p. 9)
[12]
B (LABEL)
9 Discharge port
10 Frame
11 Air cleaner
12 Frame serial number
13 Oil drain plug
14 Oil filler cap/dipstick
15 Pump drain plug
16 Suction port
3