Epson OT-WH30 Installationsanleitung Seite 4

Installation
1. Attach the wall-mount to the wall.
CAUTION
❏ To fix the printer securely, install the wall-mount on a wall made of wood,
concrete, or metal. The thickness of the wall should be 10 mm or more.
❏ In order to insure that the wall-mount can properly support the weight of the
printer, please secure it with screws appropriate to the type of wall the wall-
mount is installed on. A screw with 4 mm diameter and length of 12 mm or more
is recommended.
❏ Be sure to fasten the wall-mount securely to the wall with a screw in each of the 6
holes.
❏ Before attaching the wall-mount, make sure enough space remains around the
printer.
❏ Make sure that there is enough space for opening the roll paper cover.
2. Turn off the printer.
3. Disconnect the AC cable from the wall outlet.
84 mm
26 mm
26 mm
English
OT-WH30 Installation Manual 4