Epson OT-WH30 Installationsanleitung Seite 3

Precautions
Screws for mounting the bracket differ depending on the printer model as described
below. If you use the screws for another printer model, or mix up the screws by mistake,
the bracket cannot be mounted properly or may not work properly.
❏ TM-m30
3x10 screws for bracket (Silver)
❏ For printers other than TM-m30
2.5x10 screws for bracket (Black)
Q
NOTE
❏ Screws for wall-mount are not included. Prepare six screws appropriate to the type of
wall the wall-mount is installed on.
❏ Depending on the conditions during storage and shipping, some rust may form
around the edges of the wall-mount or bracket. Remove any rust with sandpaper.
English
OT-WH30 Installation Manual 3