Cd Functions; Usb Functions - auna KCD-20 Bedienungsanleitung

EN
30

CD FUNCTIONS

• Switch on the unit and press FUNCTION several times to select the CD
mode. Insert a music or MP3 CD into the CD tray with the printed side
facing up ( to open/close the CD tray).
• The CD is automatically read in and the number of tracks contained is
shown on the display.
• Use the buttons
playback with . For MP3 discs, use the buttons
between included folders.
• Press ID3 (for MP3 CDs) to show stored ID3 tags on the display.
• Play modes: Press PLAY MODE several times to switch between the
play modes REPEAT 1 (current track is repeated) - REPEAT ALL (all
contained tracks are repeated) - REPEAT FOLDER (current folder is
repeated - only for MP3 CDs with folder structure) - RANDOM (random
mode) - OFF (normal play mode).
To generate a playlist:
• End playback with .
• Press MEM and select the first track of the playlist with the arrow keys
/ .
• Press MEM again to confirm the selection.
• Repeat the process to add a maximum of 20 more titles.
Note: The programming mode is automatically terminated if no input
is made for 10 seconds. Press , to play the playlist. Press to delete the
playlist.

USB FUNCTIONS

Select any function mode (not USB) or switch the unit to standby mode
before connecting a USB data carrier. Then switch to USB mode with
FUNCTION. The unit automatically reads the storage medium and shows
the number of folders and music files found on the display. Operation and
functions are similar to the procedure explained in the CD FUNCTIONS
section. However, only audio files in MP3 format are recognised and played
back. Please select another function mode with the FUNCTION button or
switch the unit to standby mode before removing the storage medium from
the USB slot.
for play/pause and / for navigation. End
/ to select