Philips Steam&Go GC360 Benutzerhandbuch Seite 41

Problem
The steamer
EN
does not heat
up.
The steamer
does not
produce any
steam.
Water droplets
drip from the
steamer head.
Possible cause
The steamer is not
plugged in properly
or not switched on.
The steamer is not
plugged in properly
or not switched on.
The steamer has
not heated up
sufficiently.
You have not
pressed the steam
trigger fully.
The water level in
the water tank is
too low.
The water tank is
not in place.
The steamer has
not heated up
sufficiently.
Solution
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the steamer is
switched on.
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the steamer is
switched on.
Let the steamer heat up for
45 seconds (steam-ready
lights up). The steamer is
ready to be used when the
light goes off.
Press the steam trigger fully
for a few seconds.
Unplug the steamer and
refill the water tank.
Insert the water tank
properly.
Let the steamer heat up for
45 seconds (steam-ready
lights up). The steamer is
ready to be used when the
light goes off.
41