Infrared Remote Control; Operation - Chauvet DJ SWARM WASH FX ILS Bedienungsanleitung

Operation

IRC-6 Infrared Remote Control
The Swarm Wash FX ILS can be operated with the CHAUVET IRC-6. To enable IR wireless control, follow
the instructions below.
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select from on or oFF.
4. Press <ENTER>.
IRC-6 Operation
Automatic Mode
To turn on automatic mode with the IRC-6:
BLACK
AUTO SOUND
OUT
To adjust the speed of the automatic program:
SENSI-
STROBE SPEED
TIVITY
%
MANUAL FADE
Sound-Active Mode
R G B
To turn on sound-active mode with the IRC-6:
A UV W
Manual Control
-
+
0
To toggle which effects are active:
1 2 3
4 5 6
7 8 9
Black Out
To black out the product with the IRC-6:
This will turn off all the LEDs until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing <BLACK OUT>.
Black Out may have been activated.
The buttons on the IRC-6 not listed above are reserved for future use.
Swarm Wash FX ILS User Manual Rev. 5
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to select the program (see Programs).
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed.
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to select the program (see Programs).
• Press <1> to toggle the wash.
• Press <2> to toggle the swarm effect.
• Press <3> to toggle the laser.
• Press <4> to toggle the SMD strobes.
1. Press <BLACK OUT> on the IRC-6.
Page 18 of 125