D-Fi Usb Connectivity; D-Fi Usb Compatibility; Configuration (D-Fi Usb); D-Fi Usb Dip Switch Channels - Chauvet DJ SWARM WASH FX ILS Bedienungsanleitung

D-Fi USB Connectivity

The Swarm Wash FX ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi
USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-
Fi receiving/transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display
control / menu buttons will be unavailable until you unplug the D-Fi USB. The priority
levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display/Menu Buttons

D-Fi USB Compatibility

The D-Fi USB can receive a DMX signal from the D-Fi Hub and the FlareCON Air 2 as well as other D-Fi
USB products.

Configuration (D-Fi USB)

1. Set the DMX Personality and DMX address on the Swarm Wash FX ILS.
2. Use the Chart provided to set BOTH:
• the Channel, and then
• The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.

D-Fi USB DIP Switch Channels

Receiving
Ch. 1 2 3 4 T/R Ch. 1
1
2
3
4
5
6
7
8
Page 13 of 125
Receiving
2 3 4 T/R Ch. 1
9
10
11
12
13
14
15
16
Transmitting
2 3 4 T/R Ch. 1
1
2
3
4
5
6
7
8
Swarm Wash FX ILS User Manual Rev. 5
Operation
Transmitting
2 3 4 T/R
9
10
11
12
13
14
15
16