Herunterladen Inhalt Inhalt Diese Seite drucken

Withings BPM Connect Bedienungsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für BPM Connect:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
EN
Declaration – electromagnetic emissions and immunity
FR
for equipment and systems that are not life-supporting and are specified for use only in a shielded location
DE
SV
The Wi-Fi Smart Blood Pressure Monitor declaration electromagnetic immunity
NL
FI
This Wi-Fi Smart Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the Wi-Fi Smart Blood
DA
Pressure Monitor should ensure that it is used in such an environment.
IT
Immunity test
IEC 60601 test level
ES
CS
Conducted
3 Vrms
PL
RFIEC 61000-4-6
150 kHz to 80 MHz
PT
RO
Radiated RF IEC
3 V/m
HU
61000-4-3
80 MHz to 2.5 GHz
SK
ET
EL
IS
LV
LT
SL
TR
BG
HR
NO
Compliance
Electromagnetic
level
environment – guidance
N/A
N/A
N/A
Portable and mobile RF
communications equipment
should be used no closer to
any part of the equipment
or system, including cables,
than the recommended se-
paration distance calculated
from the equation appli-
cable to the frequency of
the transmitter. Interference
may occur in the vicinity of
equipment marked with the
following symbol  
.
Declaration – electromagnetic immunity
This Wi-Fi Smart Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the Wi-Fi Smart Blood
Pressure Monitor should ensure that it is used in such an environment.
Immunity test
IEC 60601 test level
Electrostatic discharge
Contact: ±8 kV
(ESD)IEC 61000-4-2
Air: ±2 kV, ±4 kV, ±8 kV,
±15 kV
Electrical fast transient/
2 kV for power supply lines
burst IEC 61000-4-4
1 kV for input/output lines
Surge IEC 61000-4-5
1 kV differential mode
2 kV common mode
Voltage dips, short
-5% UT(95% dip in UT)
interruptions and voltage
for 0.5 cycle, -40 % UT
variations on power
(60% dip in UT) for 5 cycles,
supply input lines
-70% UT(30 % dip in UT)
IEC 61000-4-11
for 25 cycles, -5% UT
(95% dip in UT) for 5 sec
Power frequency (50/60 Hz)
30 A/m 50 Hz or 60 Hz
magnetic field IEC 61000-4-8
Compliance level
Contact: ±8 kV
Air: ±2 kV, ±4 kV, ±8 kV,
±15 kV
N/A
line(s) to line(s): ±1 kV
100 kHz repetition frequency
N/A
30 A/m 50 Hz and 60 Hz

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wpm05

Inhaltsverzeichnis