EFBE-SCHOTT SC MCM 5000 Bedienungsanleitung Seite 6

BEFORE FIRST USE
Before using for the first time or after long periods of non-use, the machine must be flushed
out in order to clean the internal piping thoroughly.
• Fill the water tank with fresh water. You can fill the tank without removing it by lifting
the cover and pouring water using a jug, or you can remove the tank. To do so, tilt
the tank towards you and lift it up.
• Fill the tank to the MAX level, place the cover back and slide the tank back in the
receptacle.
Note: Make sure the tank is full and correctly placed, that the lever is down and there is
no capsule inside.
• Plug in the coffee machine and press the power button. The lights will blink while the
machine is heating up. This process takes about 45 seconds.
• Place a large recipient (minimum 250 ml capacity) under the coffee outlet.
• Press the large coffee cup button; the flush out process will stop automatically when
complete.
Water pump
If the machine has trouble pumping water after a long non-use period or before the first
use, you can pump the water manually:
• Insert the pipe into the water inlet at the back of the machine.
• Pour water into the pipe and inject the water from the pipe into the machine so that
the internal circuit is filled with water.
• If necessary, repeat the operation two or three times.
SC MCM 5000 6