Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet DJ Swarm 5 FX ILS Bedienungsanleitung

4. Operation

This product is not designed for continual use. Make sure there are regular breaks during operation to
maximize the life of the lasers. Always disconnect the Swarm 5 FX ILS from power when not in use.

Control Panel Operation

To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Enables the currently displayed menu or sets a selected value into the selected function

Menu Map

Refer to the Swarm 5 FX ILS product page on
Mode
DMX d_ _ _
Automatic
Aut_
program
Sound-active
Sou_
program
Slave mode SLA
ILS mode iLS_

Configuration (DMX)

The Swarm 5 FX ILS works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.

DMX Personality and Starting Address

When selecting a starting DMX address, always consider the number of DMX channels the DMX mode
uses. If the starting address is set too high, access to some of the product's channels could be restricted.
The Swarm 5 FX ILS uses 9 DMX channels, which defines the highest configurable address to 504.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the DMX starting address, do the following:
1. Press <MENU> repeatedly until d_ _ _ shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the starting address, from d001–504.
3. Press <ENTER>.
The display will continue to blink until the fixture receives a DMX signal.
Page 13 of 117
www.chauvetdj.com
Programming Levels
d001–504
Aut0–6 S 0–100
Sou0–6
SLA
iLS1–4
http://www.chauvetlighting.com/downloads/
for the latest menu map.
Description
Selects the DMX starting address
FAdE
Automatic programs (see Programs)
SnAP
Sound-active programs (see Programs)
Sets slave mode
Sets ILS mode
Swarm 5 FX ILS User Manual Rev. 5
Operation