Battery Power; Footswitch Operation; Product Overview - Chauvet DJ EZLink FS BT Schnellanleitung

Battery Power

The EZLink FS BT comes with a rechargeable lithium battery for cable free operation.
Charging the Battery
The battery charges whenever the EZLink FS BT is plugged into the external charger and the charger is plugged into a
power source. If the product is plugged in and not in operation, make sure the product is turned off.
Battery Charge Notes
• Avoid depleting the battery below 10%.
• For best results, charge the battery in a temperature between 32 °F (0 °C), and 95 °F (35 °C).
• When charging the battery, keep the product at least 1 m from any open flame or hot plate.
• If the battery is completely discharged, the device cannot be turned on immediately when the charger is
connected. Allow a depleted battery to charge for a few minutes before turning on the device.
• While charging, the device may heat up. This is normal and should not affect the device's lifespan or performance.
If the battery gets hotter than usual, the charger may stop charging.
• Do not charge the battery in a closed container.
• Do not charge the battery for more than 24 hours.
Battery Run Time
Maximum Run Time
Up to 8 hours

Footswitch Operation

Pedal
1
2
3
Bluetooth Control
The EZLink FS BT can be operated with the BTAir application over a Bluetooth connection. Pair the EZLink FS BT with
the BTAir application. In playback mode, use the pedals to move from one playback to the other. For more information on
using the BTAir app, download the BTAir User Manual from www.chauvetdj.com.
®
*The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.

Product Overview

Power
Switch
• The EZLink FS BT only works while the BTAir application is in playback mode.
• Only 1 footswitch at a time can be paired to the BTAir application.
EZLink FS BT QRG Rev. 1
QUICK REFERENCE GUIDE
Action
Back
Blackout
Next
FLASHING = PAIRING
RED = CHARGING
SOLID = PAIRED
GREEN = CHARGED
BACK
Function
Moves backward through the preset playbacks
Blackout fixtures
Moves forward through the preset playbacks
POWER IN:
5VDC
BLACKOUT
Recharge Time
2 hours
DC Power
NEXT
EN
Input
2