Cleaning Door Tray; Defrosting; Out Of Operation - Midea MDRB438FG-Serie Bedienungsanleitung

3.2 CLEANING DOOR
TRAY
The picture above is only for reference.
The actual configuration will depend on
the physical product or statement by the
distributor
Cleaning steps:
a. In order to take off the tray,
punch the bottom of right part of
the tray several times, then punch
the bottom of left part, as shown in
the figure.
b. The tray can be easily taken off
after it has been loosened.

3.3 DEFROSTING

•
The refrigerator is made based
on the air-cooling principle
and thus has automatic
defrosting function. Frost
formed due to change of
season or temperature may
also be manually removed by
disconnection of the appliance
from power supply or by wiping
with a dry towel.

3.4 OUT OF OPERATION

•
Power failure: In case of power
failure, even if it is in summer,
food inside the appliance can
be kept for several hours; during
the power failure, the times
of opening the doors must be
reduced, and no more fresh
food should be placed into the
appliance.
•
Long-term non-use: Unplug
and clean the appliance and
leave the doors open to prevent
odors.
•
Moving: Before the refrigerator
is moved, take all objects
out, fix the glass partitions,
vegetable holder, freezing
chamber drawers etc. with tape,
and tighten the leveling feet;
close the doors and fix them
with tape. During the move,
the appliance must not be laid
upside down or horizontally, or
be exposed to strong vibration;
the inclination during the move
should be no more than 45°.
IMPORTANT:
The appliance shall run continuously once
it is started. Generally, the operation of
the appliance shall not be interrupted;
otherwise the service life may be
impaired
EN-19