Maintenance / Care; Spare Parts - Würth POWERQUAD M AC/R Originalbetriebsanleitung

Note
With this lamp simultaneous char-
ging AND lighting is possible.
— The lamp has an integrated
overcharge protection and can
remain permanently connected to
the power supply.
Note
Fully charge the hand lamp before it is
stored for a longer period. Recharge
the lamp regularly if it is not used for a
longer period of time.
Note
Always keep the charging socket on
the lamp free of dirt! Use protective
cap!
Operation
1 2 3 4 5
The luminous flux can be adjusted using the +/- button.
There are five brightness levels available for this purpose:
Brightness levels
5
10
20
50
100
The remaining running time in hours (h) is automatically
displayed for the respectively selected brightness setting!
14
100 100
50 80
20 60
10 40
5 20
6 7 8
9 10
Luminous flux
approx. 200 Lumen
approx. 400 Lumen
approx. 800 Lumen
approx. 2,000 Lumen
approx. 4,000 Lumen

Maintenance / care

Attention!
Clean the device only when the mains
plug has been removed.
Clean the lamp with hot water, or if necessary
■
with a standard detergent.
Do not use any technical solvents, acetone,
benzene, tetrachloromethane, etc. Likewise, do
not leave in contact with oils or grease for long
periods.
A damaged lead may only be exchanged
■
by the manufacturer or an authorised service
company.
Disposal
Do not throw the appliance into the
household waste!
Always recycle small electrical appliances
and packaging in an environmentally friendly
manner. According to the European Directive
, power tools that are no longer usable must be collected
separately and recycled in an environmentally sound
manner.
Warranty
We provide a warranty for this Würth device from the date
of purchase and in accordance with the legal/country-
specific regulations (proof of purchase through invoice or
delivery note).
Damage that has occurred will be corrected either by
replacement or by repair. Damage caused by improper
handling is not covered by the warranty.
Claims can only be acknowledged, if the device is trans-
ferred fully non-disassembled to a Würth agency, your
Würth sales representative or a Würth authorized customer
service office.
Subject to technical changes without prior notice.
We accept no liability for printing errors.

Spare parts

If, in spite of careful manufacturing and test procedures,
the device becomes faulty, contact Würth masterService to
arrange a repair.
With any enquiries or spare parts orders, always quote the
item number as given on the device type plate.