For Your Safety; Safety Instructions; Information For Operation; Mounting On A Tripod - Würth POWERQUAD M AC/R Originalbetriebsanleitung

GB
Please read and comply with this
instruction manual prior to first use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
Note
Modification of the device or manu-
facturing of additional devices is not
permitted. Such modifications can
result in personal injury or malfunc-
tions.
Only appointed and trained personnel may
■
carry out repairs to the device. For such pur-
poses, always use original spare parts from
Adolf Würth GmbH & Co. KG. This will ensure
the continuing safe operation of the device.
Note on the use of lamps with
according to EN 60598-2-24
IP 4x
IP 5x
IP 6x
12

For Your Safety

Safety instructions

-mark
Environment without
dust deposition
Environment with
deposition of non-
electrically conducting
dust
Environment with de-
position of electrically
conducting dust
WARNING - Prior to first use
always read the Safety
instructions!
Failure to observe these operating instructions and the
safety instructions may result in damage to the device
and dangers for the operator and other persons.
Warning
Do not look directly into the switched on lamp! Risk of
eye injuries!
Attention
The luminous elements of the lamp cannot be changed
by the user.
Use only original Würth accessories and
■
spare parts.

Information for operation

Operating modes:
• upright, to a tilt angle of 90°
• horizontal (with upward light emission)
• suspended (mounted on a hook or a tripod).
Attention!
In case of exposure to splash water
connect the device only to IPX4
sockets!

Mounting on a tripod

One or two lamps mountable with mounting
rail Item no. 0981 180 591 on tripod item no.
0981 100 1/ 0981 101 1