Erp Data; Operating Limits Heat Pump - Ferroli OMNIA S 3.2 Installations- Und Bedienungsanleitung

OMNIA S 3.2
Indoor unit technical data
Power supply
Exchanger type
Type of pump
System expansion tank volume
System water safety valve calibration
System hydraulic fittings
DHW hydraulic fittings
Refrigerant fittings / liquid line ***
Refrigerant fittings / gas line
Minimum system water content
Min. coil surface for DHW heater
(minimum / recommended)
Internal backup heater
System temperature (min-max)
System pressure (min-max)
SWL - Sound power level indoor unit
Max absorbed current
Net weight
Weight when working ****
Weight of packaged unit
*** For matching with external units mod. 4-6, an adapter from 3/8" SAE to 1/4" SAE is supplied for the liquid line Ø 6.35.
**** Weight refers to basic unit without accessories

3.2 ERP data

Model
low temperature (produced water 35°C)
Efficiency class in
heating
average temperature (produced water 55°C)
low temperature (produced water 35°C)
SCOP
average temperature (produced water 55°C)
produced water 7°C
SEER
produced water 18°C
NOTE: Efficiency class calculated according to the European regulation 811/2013. The values refer to a unit without any optionals or accessories.

3.3 Operating limits heat pump

COOL MODE
Produced water temperature °C
Operation range by heat pump with possible
limitation and protection.
10
Electronic circulator (8 mca)
15
steel 1.4 / 2.5
enamelled 1.7 / 3.0
39 39 39
33
35
35
4 6
191 195
129 138
4.85 4.95
3.31 3.52
4.99 5.34
7.77 8.21
-
-
-
Produced water temperature °C
Operation range by heat pump with possible limita-
tion and protection.
With IBH (system electric heater) installed.
Maximum inlet water temperature line for heat
pump operation.
Cod. 3541V941 - Rev. 04 - 05/2022
16
230V ~ 50 Hz
Brazed stainless steel plate type
Electronic circulator (9 mca)
10
3
1" GAS M
3/4" GAS M
3/8" SAE / Ø 9.52
5/8" SAE / Ø 15.88
3
5 - 65
1 - 3
39 40 40 40
14
35
37
37
8 10 12 14
205 204 189 185
A+++
131 136 135 135
A++
5.21 5.19 4.81 4.72
3.36 3.49 3.45 3.47
5.83 5.98 4.89 4.86
8.95 8.78 7.10 6.90
HEAT MODE
NOTE DHW MODE: the produced water temperature is the tem-
perature of the water produced by the unit and not the DHW tem-
perature available to the user, which is a function of this parameter
and of the surface of the coil of the DHW cylinder, if any.
16T
400V ~ 3N 50 Hz
25
1.75 / 4.0
2.5 / 5.6
6
40 40 40
10
36
38
38
16 12T 14T 16T
182 189 185 182
133 135 135 133
4.62 4.81 4.72 4.62
3.41 3.45 3.47 3.41
4.69 4.86 4.83 4.67
6.75 7.04 6.85 6.71
DHW MODE
-
-
-
Produced water temperature °C
Operation range by heat pump with possible limita-
tion and protection.
With IBH (system electric heater) installed.
Maximum inlet water temperature line for heat
pump operation.
EN
UM
-
-
-
l
bar
-
-
-
-
l
m
2
m
2
kW
°C
bar
dB(A)
A
kg
kg
kg
UM
ηs (%)
class
ηs (%)
class
W/W
W/W
W/W
W/W
85