Noise/Vibration Information; Mounting And Operation - Bosch EasyGrassCut 18V-230 Originalbetriebsanleitung

Charger
Weight according to
EPTA‑Procedure 01:2014
Protection class

Noise/Vibration Information

Noise emission values determined according to EN 62841-4-4.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Uncertainty K
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4
– Vibration emission value a
h
– Uncertainty K

Mounting and Operation

Action
Product features
Delivery scope
Removing the transport safety
Connecting the shaft
Adjusting the handle
Mounting the protection guard
Battery charging and inserting
Switching On and Off
Switching from lawn trimming/
edge cutting
Removing the line spool
Winding line on spool
Mounting the line spool
Line feeding
Maintenance, Cleaning and Stor-
age
Accessories
Assembly
Caution: Switch the garden tool off and pull the mains
u
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (9).
Bosch Power Tools
AL 1810 CV
kg 0.17
/ II
dB(A)
dB
dB(A)
dB
2
m/s
2
m/s
Connect the individual parts of the shaft until they can be
heard to engage.
Figure Page
Mounting and adjusting the handle (see figure E)
A 286
The handle (1) can be set to different positions. To change
B 287
the adjustment, press buttons (7) and move the handle to
C 287 the desired position. Release the buttons (7) again so that
the handle can engage.
D 288
E 288
Mounting the protection guard (see figure F)
F 289
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
G 290
Position the protection guard (8) on the trimmer head and
H 290
fasten it with the provided screw.
I 291
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
J 292
tion.
K 292
L 293
Switching on
M 293
Caution: Switch garden tool off and remove battery
u
N 294
from machine before adjusting or cleaning.
The cutting line continues to rotate for a few seconds
u
O 295
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
Do not briefly switch off and on again several times in
u
a row.
Only use Bosch approved cutting elements. Cutting
u
performance will vary with different cutting elements.
Charging the Battery
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
AL 18V-20 AL 1830 CV
0.48 0.40
/ II / II
3 600 HC1 A..
72
= 2.5
80
= 1.0
< 2.5
= 1.5
F 016 L94 450 | (10.05.2022)
English | 17
AL 1880 CV
0.60
/ II
3 600 HC1 C..
74
= 2.5
82
= 1.0
< 2.5
= 1.5