Automatic Mode - HSK Heizstab 4 Betriebsanleitung

Automatic mode
Turn the dial to AUTO.
Time
Measured
temperature
Absence mode
Comfort or economy
(up to program change)
When starting up, the temperature meas-
ured by the thermostat is displayed (the
symbol appears above the °C).
Press the button i to display the set-point
temperature.
• The temperature display can be reversed
(CF02 start up menu):
– automatic mode: set-point temperature,
– press i: measured temperature.
manual mode
EN
Forced operation
(from 30 minutes to 4 hours)
• If you do not want to use a program, you
can go to continuous Economy mode
(dial turned to ), continuous Comfort
mode ( ) or continuous Frost Protection
mode ( ).
Current setting
(e.g. comfort)
Day
Heating demand
mode
53