Functions And Use; Anti-Freeze Function - HSK Heizstab 4 Betriebsanleitung

Heizstab 4
Functions and use
The Heizstab-4 is equipped with an IR inter-
face for wireless communication with an ex-
ternal remote control unit. If the remote con-
Turning the device on and setting heating
temperature
Briefly press the button to switch on the de-
vice. The connection with the remote con-
trol is automatically established. The LED in-
dicator shows the current setting:
• Heating switched off – LED does not light up
• Heating switched on – LED lights up yellow
Anti-freeze function
When the device is off but still receives pow-
er, and the temperature inside the room
falls down below 6° C the device will au-
tomatically turn on and start heating. This
LED diode
on/off button
EN
IR receiver
trol fails, the basic function (On / Off) can be
selected via the on / off button.
• Connected to remote control – LED lights
up blue
The current status (setting) is saved when
the power is disconnected and continues
when the power is restored.
will prevent the heating medium inside the
radiator from freezing. When this function
is active every 4 seconds a flashing orange
LED diode is visible.
39