Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting up
After installation you need to program ini-
tial settings. Turn the dial to the off position
and press the right-hand button for 5 sec-
onds until H600 code appears (maintenance
menu reserved for the installer).
Press OK.
The screen displays CF01.
5 sec.
CF01 – Correction of room temperature
measurement.
If there is a difference between the room
temperature and the temperature indicat-
ed by the programmer, it is possible to cor-
rect it (from - 4°C to +4°C in steps of 0.1°C).
Press + or – to change the value, OK to con-
firm it and go to the next menu.
47
EN
Werbung
Inhaltsverzeichnis
