Cleaning At Commissioning; Qualification/Operation/Frequency - Mbm E265P Installationsanleitung

6.
MAINTENANCE
Qualification - Operation - Frequency
"Generic" Operator
Person authorised and in charge of ap-
pliance operation with active guards and
capable of performing simple tasks.

Cleaning at commissioning

Appliance cleaning
Cleaning parts in contact with foodstuff
Flue cleaning
Checking thermostat
Checking microswitch
Checking supply cable
Checking safety valve
Top cleaning (chrome-plated, cast iron)
If the supply cable should be damaged, contact authorized customer service for replacement
Should a problem occur, the generic operator performs the first search and, if qualified,
eliminates the cause of the problem and restores the appliance correct operation.
If the problem cannot be resolved, turn the appliance off, disconnect it from the electrical
mains and shut all the supply valves. Then contact authorized customer service.
The authorized maintenance technician intervenes when the generic operator was not able
to pinpoint the cause of the problem, or whenever restoration of correct operation of the ap-
pliance entails executing operations for which the generic operator is not qualified.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
OPERATION
"Homogeneous" Operator
Learned operator, authorized to carry out
the handling, transport, installation, main-
tenance, repair and demolition of the
equipment.
FREQUENCY
Upon arrival after installation
Daily
Daily
Yearly
Upon arrival after installation - Yearly
Upon arrival after installation - Yearly
Upon arrival after installation - Yearly
Upon arrival after installation - Every six
months
Daily
- 18 - 18