Safety Information; Intended Use - Oase InScenio FM-Master Home Inbetriebnahme

Safety information

Electrical connection
• Only connect the unit if the electrical data of the unit and the power supply match.
• Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
• Protect open plugs and sockets from moisture.
Safe operation
• Disconnect any connected units that could pose a danger from the InScenio FM-Master after
use to prevent them from being switched on accidentally. For example:
– Units that can heat up.
– Units with exposed moving parts that could cause injuries, such as electric knives or saws.
• Do not use the unit, if electrical lines or the housing are damaged.
• Never immerse the unit in water or other liquids.
• Only use the unit with the protective hood fitted. This also protects the unit from the effects
of the weather.
• Do not carry or pull the unit by its power cable.
• Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
• Do not use multi-outlet strips.
• Should problems occur, please contact the authorised customer service or OASE.

Intended use

Only use the product described in this manual as follows:
• Operation only as a power supply distributor for suitable OASE products.
• Operation only at ambient temperatures of -20 °C ... +45 °C.
• While adhering to the technical specifications.
The following restrictions apply to the unit:
• Do not use for commercial or industrial purposes.
10