Operating And Display Elements - HSM Securio C18 Betriebsanleitung

2 Proper use, warranty
Remove the shredded material container
and check the name plate on the cutting
head (see point 3 Overview) to fi nd out
which cutting width and mains voltage your
document shredder is designed for. Refer to
the relevant point in the operating manual.
The shredder is designed for destroying
paper. Depending on the cutting type, it can
also handle small quantities of the following
materials:
Shred width (mm)
Credit and charge cards
CDs
Its sturdy drive mechanism is not damaged
by paper clips and staples.
The warranty period for the document
shredder is 3 years. There is a special
warranty for the HSM solid steel cutting
rollers in the document shredder, which is
provided independently of the guarantee,
and remains valid for the entire service life
of the machine (HSM Lifetime Warranty).
This warranty and guarantee exclude wear
and damage caused by improper handling
or actions taken by third parties.
HSM guarantees the delivery of spare parts
for up to 10 years after the production of
this model has been discontinued.
02/2021
5.8 3.9 3.9x30 1.9x15
● ● ● ●
●
SECURIO C 18
3 Overview
1 2 3 4 5 6 7
1 Shredded material container
2 Safety instructions
3 Light barrier
4 Safety element
5 Operating and display unit
6 Name plate
7 Mains switch

Operating and display elements

4
3
1
1 Operation button
2 Reverse button
3 Display: Container full
4 Display: Cutting unit blocked
5 Display: Container open
Safety element pressed
6 Display: Ready for operation
english
2
5
6
11