Initial Configuration; Configuration Procedure - Atag NEOZ Installationsanleitung

INITIAL CONFIGURATION

WARNING!
To guarantee safety and correct operation of the system interface, it must be
commissioned by a qualified technician in possession of the skills as required by law.

CONFIGURATION PROCEDURE

Initialisation
Selecting the
language
Selecting date and
time
Selecting the mode
daylight saving time
Selecting the zones
"Zones" Menu
Setting the "Zone"
parameters
6 / EN
Insert the system interface into the connection shoe by pushing it gently
downwards and making sure that the products are powered; after a brief
initialisation, the device will be ready to be configured.
The display screen shows "Language". Select the language by rotating the
knob. Press OK to confirm
The display shows the "Time & Date". Turn the knob to select day, month and
year. For each selection, press the knob to confirm.
Once the date is set, the selection moves to setting the time.
Turn the knob to set the correct time; for each selection, press the knob to
confirm.
Once the date is set, the selection moves to the daylight saving time setting.
Turn the knob to select TIME PROGRAM or MANUAL.
If you want the system to automatically update the period when daylight sav-
ing time is in use, select TIME PROGRAM. Press the knob to confirm.
This screen is used to select the hydraulic zones to be displayed in the
"Zones" user menu. Turn the knob to select the zones in the system and
press the knob to confirm.
For devices compatible with this function, you can set the following param-
eters for the selected Zone:
- Operating mode: Manual/Programmed/Off;
- Zone Name (only for compatible devices);
- Room temperature Setpoint;
- Heating Controller (only for compatible devices)
set the type of device associated with the zone being heated:
• none
• room sensor
• thermostat;
- Cooling Controller (only for compatible devices)
set the type of device associated with the zone being cooled:
• none
• room sensor
• thermostat;