Atag NEOZ Installationsanleitung Seite 12

TECHNICAL AREA
WARNING!
To guarantee safety and correct operation of the system interface, it must be
commissioned by a qualified technician in possession of the skills as required by law.
To enter the technical area simultaneously press the "Esc" and "Menu" buttons until "Enter
code" appears on the display.
Turn the knob and insert the technical code (007) and press to confirm.
Technical area
Language
Time & Date
BridgeNet Bus network
setting
Zone mode
Complete Menu
Guided procedures
Service
Faults
IMPORTANT!:
For more details on the setting of the parameters and procedures of the technical area
please refer to the installation manual of the single products (boilers, heat pumps and
hybrid systems, etc.).
Compliance
Standard
Compliance
Standard
12 / EN
Show the connected devices and their features
Access to all menus and technical parameters enabled according to the
connected devices and available zones
Dedicated menu for guided procedures
for setting the devices included in the system
Quick access to the service parameters for the technician
EMC: 2014/30/EU
RED: 2014/53/EU
ROHS: 2015/863/EU
EMC: EN 55014-1:2017; EN 55014-2:2015; CISPR 14-1:2016; CISPR 14-2:2015
RED: ETSI EN 300 328: v2.2.2; ETSI EN 301 489-1: v2.2.3; ETSI EN 301 489-17: v3.2.2;
EN 62311:2008; EN 62368-1:2014+A11:2017
ROHS: EN 50581
EEMC: Electromagnetic Compatibility Regulations 2016
RED: Radio Equipment Regulations 2017
ROHS: Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
EMC: BS EN 55014-1:2017; BS EN 55014-2:2015; CISPR 14-1:2016; CISPR 14-2:2015
RED: ETSI EN 300 328: v2.2.2; ETSI EN 301 489-1: v2.2.3; ETSI EN 301 489-17: v3.2.2;
BS EN 62311:2008; BS EN 62368-1:2014+A11:2017
ROHS: BS EN 50581
Language setting
Date & Time setting
Zone control advanced settings
List of the last 10 detected errors