Team Kalorik TKG RVC 1004 AB PB Bedienungsanleitung Seite 9

D. Turn on the main power switch on
the bottom of the robot
E. Activate the robot
Place the robot onto the charging
dock, making sure the metal charging
contacts on the charging dock
match up with those underneath the
robot. If successful you will hear a
series of tones. Once the power
button illuminates, the robot is ready
for use.
F. Start the cleaning cycle
Press the power button
wake up the robot.
Press the power button
start a cleaning cycle (or press the
Auto button on remote control).
If its battery gets low before finishing a
cleaning cycle, the robot will return
automatically to the charging dock.
lf the charging dock is inaccessible,
the robot will return to its starting
location and the cycle will end.
In this case, please place the robot
manually on its dock.
G. Pause
To pause the robot press the
or press the button on the remote
control.
To resume the cleaning cycle, press
button again.
To send the robot back to the
charging dock, press the
H. Power off
To end the cleaning cycle and put
your robot in standby mode, press
and hold the button until the robot
indicators turn off.
once to
again to
button
button.
9 TKG RVC 1004 AB PB