Team Kalorik TKG RVC 1004 AB PB Bedienungsanleitung Seite 8

A. Charging dock position
1. Place the charging dock on a
hard, level surface and against a
wall.
2. Make sure the place is open and
uncluttered leaving at least :
• 2 meters（6.5 feets）in front
of the charging dock
• 1 meter (2.3 feets) on both
sides of the charging dock.
3. Connect the round connector of
the adapter into the power socket
on the charging dock and the
other end into a wall outlet.
Install the charging dock in a location
that your robot can easily access. It is
recommended to place the charging
dock against a wall, and on a hard-
level surface rather than on rugs or
carpets. Always keep the charging
dock plugged in, otherwise the robot
will not automatically return to it.
B. Install side brushes
Attach side brushes to the bottom of
the robot by pressing a brush into each
slot.
C. Choose the floor brush
The main brush is ideal for daily
cleaning of dust and crumble on all
kind of floor (hard floor and carpet)
while the pet brush is especially
designed to catch animal hair and
fibers.
Make sure to secure the brush into the
case with the according cover.
TKG RVC 1004 AB PB 8