Pkm GT 100 Bedienungsanleitung Seite 89

P
OSSIBLE CAUSE
1. The water outlet / water drain screw
is not closed properly.
2. The water drain plug inside the
appliance is not or not installed
properly.
1. The appliance is set too warm.
2. The door is opened too often or too
long.
3. The appliance is installed near a heat
source.
4. Too much or too warm food in the
appliance within the last 24 hours.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
❖ The appliance is equipped with a
If the temperature sensor has a short circuit or the connection is interrupted, the
temperature indicator bar flashes every half second from the left to the right. In
this case, please contact the aftersales service.
Depending on model.
33
Depending on model.
34
M
ALFUNCTION
W
ATER DRIPS ON THE FLOOR
T
HE FOOD IS NOT FROZEN COMPLETELY
T
EMPERATURE SENSOR ERROR
TEMPERATURE SENSOR
1. Close the water outlet / water drain
screw properly.
2. Install the water drain plug inside
the appliance properly.
1. Set the appliance to a colder setting.
2. Close the door properly.
3. Please always observe the installation
instructions
« I
NSTALLATION
4. Set the appliance to a colder setting.
~ 89 ~
M
EASURE
.
.
in
» et seq.
33
. 34
chapter