General; Transport Damage; Extent Of Warranty; Contact Address / Manufacturer - ECOLAB Ecodos-PCB Betriebsanleitung

1

General

This manual contains all important information on the function, the operation, the setting and
maintenance of the
The PC-Board is for speed/timed and conductivity controlled dosing units for liquid/solid
detergents and liquid rinse products.
It is designed for the use in commercial dishwashers.
The German sections of this manual constitute the ORIGINAL OPERATING INSTRUCTIONS
NOTE
and take legal precedence.
All other languages are translations of the ORIGINAL OPERATING INSTRUCTIONS.

IMPORTANT
1.1

Transport Damage

CAUTION
WARNING
1.2

Extent of Warranty

All warranties concerning the operating safety, reliability and performance of the
are only given by the manufacturer under the following conditions:
- Assembly, connection, setting, maintenance and repair are only performed by authorised
experts.
- The Ecodos-PCB
- Only original spare parts are used in repairs.
In all other aspects, the general terms of warranty and performance conditions of
ECOLAB-Engineering GmbH
1.3

Contact Address / Manufacturer

ECOLAB-Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Tel.: (+49) 86 62 / 61 0
Fax: (+49) 86 62 / 61 2 35
E-mail:
engineering-mailbox@ecolab.com
417101373_Ecodos-PCB.docx
ECODOS-Platine
Please read this manual carefully and keep it as reference. If you have questions, please
contact us as outlined in chapter
If the Ecodos-PCB is found to have been damaged when it is unpacked, it should not be
installed!
is used according to the explanations in the Instruction Manual.
shall apply.
(at the following text named as PCB)
1.3 Contact Address / Manufacturer.
- 20 -
Ecodos-PCB
Rev. 10-03.12