Operation With A Dcc Command Station (Multimaus); Programming Modes; More Functions - roco Klimajet 61500 Handbuch

14 Analogue modes F9 - F12
01 – Locomotive headlight (front)
02 – Locomotive headlight (rear) | 04 – Function F9
08 – Function F10 | 16 – Function F11 | 32 – FunctionF12
29 Settings
266 Total Volume of all Sounds

▪ Operation with a DCC Command Station (MULTIMAUS)

Because the multiMAUS (from Firmware Version V1.05) has over 28 function keys and a light
sensor, it is particularly convenient to operate.
You can also control your locomotives via WLANMAUS for wireless freedom combined with the
advantages of the practical multiMAUS.
A further variation for easy operation is the Z21 app via your smartphone or tablet. The app
even permits you to easily import all locomotive data and preset functions from our database.

Programming modes:

We recommend: Direct CV programming (byte-wise) or POM mode (programming on the main
track).
The programming process is described in the multiMAUS/WLANMAUS manual. You can find informa-
tion on programming with the Z21 app under https://www.z21.eu/de/z21-system/z21-app/tutorials
Reading CVs:
With the appropriate equipment (e.g. / Z21 / z21 / z21start ), you can read the value.

▪ More functions

You can find out about a range of other possible set-tings, which are probably very rarely need-
ed, relating to drive speed curve, load control setting or noise synchronization from the detailed
decoder handbook. This can be downloaded from www.roco.cc
61501
32
32
61500.indd 32 61500.indd 32
61502
100 – 9999
14
00 – 255 44
03.05.2022 09:50:02 03.05.2022 09:50:02