Termozeta Libera Gebrauchsanweisung Seite 15

• Turn the iron temperature control knob (14) to the steam ironing position.
• The pilot light (11) on the iron will go on immediately and will go out a few minutes
later, when the required temperature is reached.
• During operation, the iron light (11) goes on and then automatically goes out
indicating that the iron temperature is constantly under control.
WARNING!
- During use, the iron-boiler tube (8), the iron soleplate (16) and the boiler base (2)
become very hot. Do not touch them in order to avoid burns.
- On first use and whenever the appliance is enabled, when you first press
the steam button (15) on the iron, a vibration noise will be heard: this is
perfectly normal due to the internal pump. This noise will disappear after
few seconds.
IRONING
• Before ironing delicate fabrics it is best to make trial run on a hidden piece
e.g. the hem.
• We advise you to iron more delicate fabrics needing low temperatures first,
then go on ironing more resistant fabrics needing higher temperatures.
• Press button (15) on the iron for the steam jet: the steam will gradually stop coming
out when you release the button.
• Rest the iron on the boiler base (2) during ironing pauses.
WARNING!
Some drops of water may leak out of the iron soleplate (16) when the first jet of
steam starts coming out; this is quite normal and is due to condensation forming
inside the iron-boiler connecting tube (8).
This will disappear with the following jets of steam. It is therefore not
recommended to point the first jet of steam directly on the item to be ironed. The
iron must be used and left at rest on a firm surface.
ENGLISH