Use Instructions - Termozeta Libera Gebrauchsanweisung

USE INSTRUCTIONS

CHOICE OF THE IRON TEMPERATURE
Turn the iron temperature control knob (14) so that the proper temperature corre-
sponds to indicator (13) according to the type of cloth to be ironed.L
Fig.1
13
14
HOW TO FILL TANK (17) WITH WATER
• Remove the water tank (17) from the boiler shell (1) by
grasping the proper slot located in its lower part and
by pulling the related release lever (19).
• Take out the anti-calc filter (18) fill the water tank
(17) through the hole with tap water. On first use,
rinse the water tank in order to remove any possible
manufacturing residues.
• Only use running water to fill tank (17) without
exceeding the maximum level indicator MAX.
• Never add detergents, chemical additives or water softeners.
• Reinsert the anti-calc filter (18) in the dedicated seat and fit the water tank (17)
into the appliance being careful to firmly secure it to the boiler shell (1)
STARTING UP
FOR STEAM IRONING
• Rest the appliance on a firm flat surface.
• Place the iron on base (2) of boiler shell (1).
• Fill up the water tank (17) as described in the previous paragraph.
• Completely unwind the power cord (7) and plug into the outlet.
• To switch on the appliance, press pushbutton (4), bringing it to the ON (I) position.
• The red pilot light will light on to show that the boiler is heating: ONLY WHEN THE
BLUE LAMP LIGHTS, THE APPLIANCE IS READY FOR STEAM IRONING.
ENGLISH
High temperature steam ironing (cotton,
linen)
Medium temperature steam ironing
(wool, silk)
Low temperature ironing (synthetic
fibres)
17
Fig.2
1