Mounting; Operation; Programming - IFM Electronic Efector 150 KNM Bedienungsanleitung

3 Mounting

Mount the proximity switch as shown and then program it.
not in contact with the medium

4 Operation

Adjust the sensor. To do so, press the programming button with a
blunt object.

5 Programming

Operating mode
Immediately after power on the proximity switch is in the operating
mode. In this mode all normal sensor functions are active.
You can also make the following settings on the unit:
• Adjustment mode
Switch point setting by adjustment to the empty and full state.
• Locking mode
Electronic lock to avoid tampering.
• Setting the output function as normally closed or normally open.
10
All manuals and user guides at all-guides.com
in contact with the medium