Inhaltsverzeichnis
Werbung
CHASSIS
Front tyre
Front shock unit
REMOVING THE BODY
•
Remove hook pin
TRANSMITTER SETTINGS
WARNING: SPEED CONTROLLER ALREADY PROGRAMMED IN THE FACTORY.
Important note! For some RC systems, it is possible to select the "TH TYPE" (gas distribution) in advance. (for example, 70:30 - 50:50 - 1:100%) To ensure 100% throttle function, it is absolutely
necessary to set the "TH TYPE" (gas distribution) to the value "50:50"!! Switch off the speed controller and switch on the transmitter. Set all values of your transmitter to „100%". We strongly
recommend activating the failsave function.
Battery type selection sound with
"Beep"
•
Short one beep , Nimh battery
•
short two beep, 2s Lipo
•
short three beep, 3s Lipo
•
Long one beep, Normal operation
Motor
Speed Controller
LED indication when operation
•
LED off when throttle trigger at neutral
position
•
LED flash when throttle is not at full speed
•
LED solid on when throttle is at full speed
Rear shock unit
Battery pack
•
To remove the body - swing to open
Transmitter trigger and ESC power switch position
ESC power Switch
Rear tyre
Trigger neutral point
11 // GB
Werbung
Inhaltsverzeichnis
Fehlerbehebung
