Certification Marking
Standard labelling
The maxium voltage , current, and cross section in marked at the typ plate outside of
the enclosure.
Alternative labelling
The specific terminal content, surface and the ambient temperature values are specified
on the certification label which is affixed to the backside of the booklet. The label
highlights the maximum limits for the cables and current that can be used.
Any changes to the physical terminal content or details relating to the
assembled enclosure configuration will automatically invalidate the
approval!
The following European standards apply to this document along with any applicable
local regulations.
Certification
IBExU 13 ATEX1004X EN 60079-0:2012+A11:2013
22
Standard
EN 60079-7:2015
EN 60079-0:2012+A11:2013
EN 60079-11:2012
EN 60079-0:2012+A11:2013
EN 60079-7:2015
EN 60079-11:2012
EN 60079-0:2012+A11:2013
EN 60079-31:2014
Explosion protection type
II 2G Ex e IIC T6...T5 Gb
II 2G Ex eb IIC T6...T5
II 1G Ex ia IIC T6...T5 Ga
II 1G Ex ia IIC T6...T5
II 2(1)G Ex e ia IIC T6...T5 Gb
II 2(1)G Ex eb ia IIC T6...
T5 Gb
II 2D Ex tb IIIC T
85°C...100°C Db
II 2D Ex tb IIIC T85°C...100°C
-55°C< Ta < +40°C/+55°