Herunterladen Inhalt Inhalt Diese Seite drucken

Lionelo Thermup Double Bedienungsanleitung Seite 6

Doppelflaschenwärmer
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
3.
Select quick heating on the touch panel (7, fig. A).
4.
The display shows quick heating time which you have selected. You can adjust the
time through value up and down keys (8, fig. A).
5.
The device will start working automatically 3 second after you have selected the function.
6.
The device has a smart memory system which remembers last heating time settings.
7.
The display shows heating remaining time.
8.
When heating is finished, you will hear a distinctive sound. The device switches into
a constant temperature mode automatically. The default temperature is 40°C.
9.
Before you serve food, shake the bottle and then check the temperature.
NOTE
In case of quick heating, use the device together with its cover.
Depending on the amount of milk, the recommended heating time is presented in the table below.
Bottle
Initial temp.
4°C/41°F
Glass
20°C/68°F
4°C/41°F
Plastic
20°C/68°F
Sterilization
1.
Before you start disinfecting, please wash and carefully rinse the bottle and accessories.
2.
Pour 80 ml of water into the warmer.
3.
Place accessories and the bottle upside down in the warmer.
4.
Put the cover on the device.
5.
Select disinfecting on the touch panel (7. fig. A).
6.
The display shows disinfecting time which you have selected. You can adjust the time
in the range from 1 to 30 minutes through value up and down keys (8, fig. A).
7.
The device will start working automatically 3 seconds after selecting the function.
8.
The display shows disinfection remaining time. When disinfection is finished, the device
keeps a constant temperature of the bottle. Please be careful when you are taking the
bottle out of the device due to its high temperature.
9.
The device will shut down automatically when water evaporates.
Cleaning
1.
After every use and before cleaning, unplug the device. Before you start cleaning, wait
until the device cools down.
2.
Remove water from the device.
3.
If you have heated food in the device, make sure there are no remains at the bottom.
4.
Wipe the housing and interior of the warmer with a wet soft cloth and then wipe it
EN
Amount
of water
60ml
4 min
3 min
80ml
5 min
5 min
‑ 6 ‑
Amount of milk
120ml
180ml
6 min
7 min
5 min
5 min
7 min
8 min
6 min
7 min
240ml
280 ml
7 min
8 min
6 min
6 min
9 min
10 min
8 min
8 min

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis