Lionelo Thermup Double Bedienungsanleitung Seite 3

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate
to contact us: help@lionelo.com
Producer:
BrandLine Group Sp. z o.o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland
Recommended working conditions
Humidity: 50 – 80 %
Temperature: 15 – 30°C (59 – 86°F)
IMPORTANT
Please read this operating manual before you start using the product to see its functions
and use it in accordance with intended use.
A failure to follow the safety instructions and use at variance with the manual may lead to
bodidy injuries.
Keep this manual for future reference.
1.
Do not repair or modify the device on your own. Only an authorized service technician
is allowed to perform these operations.
2.
This device is not a toy. Do not let children play with it. Keep the device out of reach of children.
3.
The device can be used by children aged at least 3 and persons with limited physical,
sensory or mental capabilities, as well as persons who lack suitable knowledge and
experience in using the device as long as their actions are supervised or if they have
been instructed on safe use of the device and related risks beforehand.
4.
Cleaning and maintenance of the device can be performed by children aged at least 8 and
when supervised. Keep this device and power cable out of reach of children below the age of 3.
5.
The device is intended for home use only. The device is not designed for outdoor use.
Do not use it for other purposes, at variance with its intended use.
6.
Make sure the power cable does not hang on the edge of the table or top. Make sure
the power cable does not contact hot elements. Do not pull it through sharp edges.
7.
Connect the device only to the power outlet with earthing. Make sure the power cable
has been correctly connected to the source of power.
8.
When powering the device, make sure parameters of the source of power correspond
to the parameters specified on the product label.
9.
Regularly check the device for damage. Do not use the device if it is damaged. Do not
try to repair the device on your own – contact the authorized service center. If the
power cable is damaged, it should be replaced by the manufacturer to avoid hazards.
10.
After use, during assembly, disassembly and cleaning, the device must be switched
off and unplugged.
‑ 3 ‑
EN
EN