Renson Healthbox 3.0 Anleitung Seite 145

• Possible actions
Button Short press
Factory reset –
Press duration: ± 1 second
– Healthbox 3.0 operates 2 hours in
Initialization nominal position
– Main LED: illuminates continuously
blue
Wake-up reset –
– Healthbox 3.0 sets itself to "Access
Point mode" for 4 hours. In this
Link mode, Healthbox 3.0 can be
connected to the installer app.
– LED
Press duration: max. 2 seconds
Both Link – Disconnect all accounts associated
buttons at the with Healthbox 3.0
same time – LED USB: 10 x flashing of both
LEDs
LED feedback (section 17)
(1)
No single account (app, web portal) still has access to the current data of Healthbox 3.0.
(2)
To reconnect Healthbox 3.0 with the app, follow the steps described in section 3.1.2
(you can log in with the existing account).
(1)
(2)
Healthbox
Long press
Press duration: ≥ 5 seconds
– Reset Healthbox 3.0 to factory settings.
New calibration is required.
– Main LED: illuminates continuously white
Press duration: between 5 and 15 seconds
– Start calibration
(according to country setting BE)
– Main LED: rapidly flashes green
Press duration: ≥ 8 seconds
– Restarting Healthbox 3.0
(same as de-energizing the device)
– Main LED: illuminates continuously white
Press duration a bit longer: 3 to 5 seconds
– Disconnect the link between the Healthbox 3.0
and
- Wi-Fi router
- The Installer app
– LED
(1)
–
3.0 en
®
145