Renson Healthbox 3.0 Anleitung Seite 110

en Healthbox
Types
Each control module kit consists of:
– 1 x control module with sensor(s)
– 1 x RJ45 patch cable of 0.5 m
– 1 x strap
There are five types of control modules. The construction of each type of control module is almost
identical and only differs by:
– Plug on print with sensors (determines which type of detection can be done): The sensor(s)
is(are) located on a plug on print plugged onto the circuit board of the control module.
– Sticker on the stepper motor showing an indication of the room/zone that needs to be
connected.
Each type of room can be detected using the 5 types of control modules:
Symbol sticker
1.
2.
Klepsticker_wasplaats_bad_HB3_E0000924.indd 1 Klepsticker_wasplaats_bad_HB3_E0000924.indd 1
3.
Klepsticker_badkamer_met_wc_HB3_E0000920.indd 1 Klepsticker_badkamer_met_wc_HB3_E0000920.indd 1
4.
Klepsticker_toilet_HB3_E0000923.indd 1 Klepsticker_toilet_HB3_E0000923.indd 1
5.
Klepsticker_keuken_HB3_E0000921.indd 1 Klepsticker_keuken_HB3_E0000921.indd 1
Each control module is also equipped with temperature sensing.
The country setting ultimately determines the control that is used during sensing.
(1)
Klepstickers_slaapkamer_HB3_E0000922.indd 1 Klepstickers_slaapkamer_HB3_E0000922.indd 1
110
3.0
®
Indication for the room/zone to be connected
+
7/05/2021 08:41 7/05/2021 08:41
Storage/utility room, workshop, dressing,
7/05/2021 08:35 7/05/2021 08:35
7/05/2021 08:39 7/05/2021 08:39
Living room, office, practice area, study, hobby room,
waiting room/sitting area, nursery, children's room,
7/05/2021 08:38 7/05/2021 08:38
TV/music room, relax room, dining room, playroom, attic
7/05/2021 08:44 7/05/2021 08:44
Washing area (DEFAULT)
Shower, bathroom without toilet
Bathroom with toilet (DEFAULT)
Wellness, garage, basement
Toilet (DEFAULT)
hall/corridor
Kitchen (open/closed) (DEFAULT)
Bedroom (DEFAULT)
Detection
(1)
H O
2
H O
2
VOC
VOC
H O
2
CO
2
H O
2
CO
2