Time Settings; Language - TechniSat DIGITRADIO 570 CD IR Bedienungsanleitung

Select Allow WiFi connection in standby mode if the WiFi connection
should be retained in standby mode as well. This setting increases power
consumption but enables app control via the TechniSat CONNECT app.
The menu item [Net Remote PIN] can be used to configure the PIN for the
control with the TechniSat CONNECT app. The standard PIN is: 1234. The
TechniSat CONNECT app can be loaded free from the usual app stores.

17.4 Time settings

> Press the MENU button and then select [System Settings] > [Time and
Date].
> Select [Time/Date Setting] to set the time and date manually.
Use the OK button to select a value. Change it using the  or  buttons.
> Confirm by pressing OK.
> Select [Update settings] to determine whether time updates should be
automatic via DAB, FM or the Internet, or whether you would like to enter it
manually.
> To do so, select [DAB update], [FM update], [NET update] or [No update].
> Under the [Time format setting] option you can activate 12 or 24 hour
format. Confirm your selection with the OK button.
> Under [Set time zone], select the current time zone in your location and,
under [Summertime] you determine whether summertime should currently
be active. This setting is displayed only if you have previously selected NET
update under the update settings.
> Under [Standby clock] you can choose between an analogue or digital
standby clock display.

17.5 Language

> Press the MENU button and then select [System settings] > [Language].
> Using  or , select one of the available OSD languages and confirm by
pressing the OK button.
DE
EN
FR
NL
69