SHX SHX20KH2000LD Bedienungsanleitung Seite 18

1. ON/OFF
Press the ON/OFF-button to turn on or turn off the device. When the device is turned
on the fan starts working. The
When you turn off the device, it will keep operating for 30 seconds, to cool down. The
2. HEATING MODE
Press the HEATING MODE-button to choose between low or high heating.

Press 1x  LOW heating  display shows

Press 2x  HIGH heating  display shows

Press three times  fan function
3. SET THE TEMPERATURE
Adjust the temperature by pressing
Press to increase the temperature or press
Please note:
 The device is heating with full power, when the room temperature is 4°C lower than the
set temperature.
 The device is heating with lower power, when the room temperature is between 0°C and
2°C lower than the set temperature.
 The device turns itself off automatically, when the room temperature is higher than the
set temperature.
 As soon as the room temperature is 2°C lower than the set temperature, the device turns
itself back on.
4. OSCILLATION
Press the oscillation-button to activate the oscillation  with this function, the blown air
is directed to the left and right.
Press the button again to turn off the oscillation.
5. TIMER TASTE
You can use the timer to switch off the device in a time-controlled manner. Each time
the button is pressed, the timer increases by 1 hour, up to max. 8 hours. The device
shows the remaining operating time every hour until the fan heater switches off
automatically.
To deactivate the timer, press the timer button repeatedly until "0H" appears on the
display.
indicator lights up.
NOTE
indicator flashes.
(10-35°C).
to decrease the temperature.
NOTE
Seite 18 von 22
.
.