Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
When the alarm sound starts, press the ALARM button
or press and hold the ALARM/SNOOZE button for ap-
prox. 3 seconds, to stop the alarm.
3.
The alarm will be turned off automatically if no button is
pressed within 2 minutes.
13 Receiving measurements
automatically
Once the power supply is enabled, the base station will dis-
play the measurement readings. Readings from the remote
sensor will be displayed within 3 minutes after powering it
on.
Read the detailed manual for more information about read-
ings (see download information on page 2).
14 Manual measurement display
1.
Press MEM button several times to display the saved
values one after another.
2.
Display order: MAX (highest value) temperature > MIN
(lowest value) temperature > MAX (highest value) hu-
midity > MIN (lowest value) humidity
3.
Press MEM button for approx. 3 seconds during
highest or lowest value display to irrevocable delete all
saved values.
17 / 60
Werbung
Inhaltsverzeichnis
