BOMANN KGE 7808 Bedienungsanleitung Seite 22

• Dismount the center door hinge, lift the freezer
door and set the door safely aside.
• Release and move the lower hinge pin to the op-
posite appliance side.
• Move and fix the bracket angle of the center door
hinge to the opposite appliance side.
• Put on the freezer door and fit it in the intended
position.
Move and fix the center door hinge accordingly.
B B B B uilt uilt uilt- - - - in in in in uilt
Figures in mm
Mounting mate Moun ting material rial
Moun Moun ting mate ting mate rial rial
(R) 1x seal
(S1) 27x screws
1 1 1 1
For ventilation, an exhaust duct of approx. 38 mm depth must be
provided on the appliance back.
The ventilation openings in the furniture base and building must be
min. 200 cm² to ensure that heated air can be freely escape.
(a) 4x guide (b) 4x bracket
(S2) 2x screws
2 2 2 2
• Put on the fridge door and fix it in the intended
position.
Transfer and fasten the upper door hinge to the
opposite appliance side; after unscrewing the
hinge pin and have reinstalled from the other
hinge side.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
(c) 4x cover
(M) 2x cover
3 3 3 3
22
(d) 4x cover