Setting The Timer; Convenience Operation; I Powerful Mode Operation; I Quiet Mode Operation - Panasonic CS-C7CKP Bedienungsanleitung

AUTO
FAN
8
MODE QUIET
7
AIR SWING
AUTO MANUAL
1 2
1
ON
5
OFF
TIMER
CHECK RESET CLOCK

SETTING THE TIMER

Ensure that the current time is correct before setting the
timer. The timer cannot be set if the time display is
flashing.
I ON-TIMER Operation
To start the air conditioner operation automatically.
• Press 1 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
I OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press 5 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4.
G Timer Mode Operation Details
• When the ON-Timer is set, operation will start
before the actual set time. This is to enable the
room temperature reaches the set temperature at
the set time.
Cooling Model
COOL,DRY, –>15 minutes
COOL,DRY, –>15 minutes
AUTO in advance
HEAT, AUTO –>30 minutes
• Once the ON/OFF Timer is set, operation will start/
stop at the set time everyday.
• The current time is not displayed when the timers
are set.
• When both timers are used together, the TIMER
mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.
7

CONVENIENCE OPERATION

OFF/ON

I Powerful Mode Operation

To obtain the set temperature quickly.
• Press 6.
POWERFUL
6
* Powerful mode indicator (orange) on the indoor
unit will light up.
FAN SPEED
* Powerful mode will operate for 15 minutes only.
3
3
• To cancel this operation, press once more.
SET
4
G Powerful Mode Operation Details
CANCEL
2
• The changes of the temperature and airflow volume
are automatic.
• The remote control display remains unchanged.
• If operation mode button is pressed, powerful
operation will be cancelled.
• During FAN – Air circulation operation, the powerful
operation are not available.
(cooling model only)
Powerful Mode
Operation
COOL / DRY
(for Heat Pump
model only)
Heat Pump Model
in advance
in advance
Temperature Airflow
volume
3°C lower
than set temp. Super High
HEAT
3°C higher
than set temp. Automatic

I Quiet Mode Operation

To provide quiet operation.
• Press 7.
* Quiet mode indicator on the indoor unit will light
up.
• To cancel this operation, press once more.
G Operation Details
• Air flow sound will reduce during operation.

I Ionizer Mode Operation

Produce negative ion for fresh air.
• Press 8.
* Ion mode indicator on the indoor unit will light up.
• To cancel this operation, press once more.
G Operation Details
• Air conditioner ON:
Provide negative ion during operation.
• Air conditioner OFF:
Provide negative ion with FAN operation.
• If blinking, press 8 twice.
If still blinking, please call service.