Safety Instructions - VOLTCRAFT MS-200LED Bedienungsanleitung

Operating instructions
Luxmeter "MS200"
Item no. 1088913
Intended use
The luxmeter is a digital measurement device to measure the illuminance level.
A graded filter can be selected for various light sources, in order to measure the actual strength
of light. Measurements are made via a foto-element with a filter, that separates the visible light
spectrum in order to be measured.
It is operated with batteries.
Always observe the safety instructions and all other information included in these operating
instructions.
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Luxmeter
• 3 batteries of type AAA/Micro
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol indicates that special tips and notes on operation are provided
here.

Safety Instructions

Please read all instructions before using this device, they include important
information on its correct operation. The warranty will be void in the event of
damage caused by failure to observe these safety instructions! We do not as-
sume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void.
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons. Never dismantle the product, except for inserting/
replacing the batteries as described in this operating manual.
• The product is not a toy and should be kept out of the reach of children.
• The product must not be exposed to extreme temperatures, strong vibrations or
heavy mechanical stress.
Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
If you see any damage, do not use the product anymore but take it to a specialised
workshop or dispose of it in an environmentally friendly manner.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed.
• In schools, educational centres, hobby and self-help workshops, the operation of
the product is to be supervised by trained employees.
• Do not leave packaging material carelessly lying around . It may become a dan-
gerous plaything for children!
• If you are not sure about the correct operation or if questions arise which are not
covered by the operating instructions, please do not hesitate to contact our techni-
cal support or another specialist.
Notes on batteries and rechargeable batteries
• Batteries/rechargeable batteries must be kept out of the reach of children.
• Check that the polarity is correct when inserting the batteries/rechargeable batteries (pay
attention to plus and minus).
• Do not leave batteries/rechargeable batteries lying around; there is a risk that they could be
swallowed by children or pets. If they are swallowed, consult a doctor immediately.
• Leaking or damaged normal/rechargeable batteries in contact with the skin can cause acid
burns; therefore, use suitable safety gloves.
• Liquids leaking from batteries/rechargeable batteries are very chemically aggressive. Ob-
jects or surfaces coming into contact with these liquids might be considerably damaged.
Thus, store batteries/rechargeable batteries in a suitable location.
• Ensure that the batteries/rechargeable batteries are never short-circuited, taken apart or
thrown into a fire. There is a risk of explosion!
• Do not recharge normal, non-rechargeable batteries. There is a risk of explosion! Charge
only rechargeable batteries that are intended for this purpose; use a suitable battery charger.
• If the product is not to be used for a while (e.g. storage), remove the batteries/rechargeable
batteries. Old batteries/rechargeable batteries can leak and cause damages on the product;
loss of guarantee/warranty!
• Always exchange the whole set of batteries/rechargeable batteries, only use batteries/re-
chargeable batteries of the same type, by the same manufacturer and in the same charging
state (do not mix charged batteries with half-charged or flat batteries/rechargeable batteries).
• Never mix normal batteries with rechargeable batteries. Use either batteries or rechargeable
batteries.
• For the environmentally friendly disposal of batteries and rechargeable batteries, please read
the chapter "Disposal".
Operation with accumulators is also possible. However, the operating time and the
display contrast are reduced by the lower voltage (battery = 1.5 V, rechargeable
battery = 1.2 V).
Therefore, we recommend operating the device with high-quality alkaline batteries
to ensure long and reliable operation.
Controls
1
2
3 9
4 8
5
6
7
1 LCD display
2 "MEM READ" button
3 "LX/FC/CD" button
4 "S" button
5 "ZERO" button
6 " " button to switch on/off the luxmeter
7 Battery compartment (on the bottom)
8 "F" button
9 "HOLD L.S." button
10 Sensor
11 Protective cap
10
11