Defrosting The Appliance; Cleaning The Appliance - Atag KD85178CD Bedienungsanleitung

MAINTENANCE

Defrosting the appliance

Defrosting of the NoFrost freezer
The NoFrost freezer defrosts automatically. Any frost deposits will then disappear.
Any ice or frost deposits that nevertheless form in the freezer compartment can be caused by
unusual use of the appliance (opening the door too often and too long or poorly sealing door,
etc.). The freezer will then need to be defrosted manually.
Manual defrosting of the NoFrost freezer
Switch off the appliance in the event of extreme ice formation. Remove the food in the
freezer and protect it so that it cannot partially or completely thaw. Clean and dry the
interior of the freezer. Switch on the appliance and adjust the temperature to the required
setting before you put the food back into the freezer.

Cleaning the appliance

Switch off the appliance and remove the plug from the socket before you start cleaning it.
Do not use abrasive cleaning agents, as they can damage the surface.
Activate the intensive freezing function 24 hours before you plan to clean the freezer.
• Regularly clean the interior of the appliance with lukewarm water. If so required, add a
neutral cleaning agent or special refrigerator cleaner to the water. Clean all surfaces with
a soft cloth. Wipe the cleaned parts with a cloth with clean water and then dry them
thoroughly.
1. Simultaneously touch the adjustment key on the right and the
ECO/Child Lock key for a few seconds.
▷ 'CL' is shown in the display to indicate that the defrost process
has begun.
The temperature is shown once again in the display when the
▷
defrost process is finished.
EN 25