welltherm RL0606 Bedienungsanleitung Seite 15

V3.5 28.07.2014
Important: Although the infrared panel heater is equipped with a good thermal insulation there will be higher temperatures also on the
backside of the panel. If the heater is too close to the wall or ceiling there could be a heat accumulation on the back. The mounting
distance of 23mm must not be underrun. An continual airflow on the backside of the heater must be guaranteed.
Step 7
Congratulations! The heater is mounted completely and is ready for use now. The plug can be inserted.
We recommend the use of wireless thermostates to optimize the efficiency and to reduce the consumption costs.
Please don't hesitate to contact us for further information!
We wish you a lot of fun with your Welltherm infrared heating panel!
Your Welltherm Team
GB
Manual_ESG_DE_GB_Rev. 3.5 | Welltherm 15