welltherm RL0606 Bedienungsanleitung Seite 11

GB
V3.5 28.07.2014
1.7. Welltherm infrared heating panels will not withstand higher humidity rates! It is not
allowed to use the heater in short distance to showers, bath tubs or pools!
1.8. It has to be secured that the electrical circuit of the panel heater can be de-energized
by switch, fuse or thermostate at any time!
1.9. The minimum distance to other objects should be 400mm on the front and 200mm on
the sides.
Welltherm infrared heating panels must not be positioned directly under a wall outlet!
1.10. For mounting the Welltherm infrared panel heaters to brick walls or stone walls use
the delivered assembly materials. For mounting the infrared panel heaters to different
fixation basics please use suitable special towels and screws which fulfill the demands on
load capacity!
1.11. The Welltherm infrared panel heater must be remounted, cleaned and transported in
cold condition only!
Manual_ESG_DE_GB_Rev. 3.5 | Welltherm 11