Operating System - Bosch 1 687 023 652 Betriebsanleitung

i
For further information on installation in the tes-
ter refer to the fitting instructions "EPS 708"
(1 689 978 559).
Fig. 12: Installation position of tower in test bench
4.�.� Desktop
i
For further information on installation refer
to the operating instructions "KMA 802/822"
(1 689 979 674).
Fig. 13: Desktop installation position
(left: in trolley, right: in test bench)
Robert Bosch GmbH
� ��� ��� ��� � ��� � �9
4.� Software installation
4.�.�

Operating system

!
The "END-USER LICENSE AGREEMENT (EULA) FOR
MICROSOFT SOFTWARE" (EULA.XPS) can be found
on the desktop. Please heed the information con-
tained in this.
i
Windows 7 Ultimate (64-bit) is pre-installed as oper-
ating system.
1. Supply the product with power.
2. Switch on the multi-point connector.
3. Switch on the On/Off switch on the back of the PC.
4. Switch on the PC by way of the Standby button.
 The operating system starts up.
 The language settings are displayed.
5. Select the local language.
6. Heed and follow the instructions on the screen.
 The PC is ready for operation.
4.�.� Software
The software (e.g. BEA-PC, FSA, ESI[tronic], EPS) is
supplied with the product. If the software is not pre-
installed, it must be installed using the data carrier pro-
vided with the product.
4.�.� doPDF
If printing problems are encountered (e.g. on
HP printers in conjunction with ESA), the program
"doPDF" can be installed from the directory
'C:\BOSCH_PR\DOPDF\DOPDF-7.EXE' and set up as
standard printer.
� �9 en
|
1 689 989 158 2012-10-12